SeaRay® 428

SeaRay® 428

No Compromise Seabed Acquisition

Don’t compromise your seabed acquisition with old fashion “omnitilt” geophones, which perform equally poorly at any angle and roll off at 15 Hz.

Capable of seismic operations to water depths of 500 meters, SeaRay 428 has  also been designed with a smaller and lighter cable option capable of the same operations in water depths of less than 100 meters, where smaller and shallower draft vessels are commonly deployed.

The omni-directional, three-component Digital Sensor Unit that is at the heart of the SeaRay 428 provides superior sensor coupling and vector fidelity, and is insensitive to any tilt of the sensor package on the sea floor. With a proven hardware design and a system architecture that incorporates built-in multi-route system power and data telemetry redundancy the SeaRay 428 provides unparalleled flexibility, efficiency, and reliability in the field.

  • BROADEST BANDWIDTH
    • 3C accelerometers: 0Hz – 400Hz
    • Hydrophone: 3Hz – 400Hz
    • Optimum coupling, low noise even in high current conditions
  • MOST PRODUCTIVE – WIDE OR NARROW AZIMUTH ACQUISITION
    • Long active spread: up to 37km
    • Continuous recording – no dead time
  • REDUCED PROJECT PROCESSING CYCLE TIME
    • Real-time seismic data QC
    • Real time data recording – immediately ready for processing
    • Real time GPS timing – no later fudging/correction for drifting clocks
SeaRay428_brochure_Sercel_EN.pdf SeaRay 428 Brochure (EN) DOWNLOAD
SeaRay428_brochure_Sercel_RU.pdf SeaRay 428 Brochure (RU) DOWNLOAD
SeaRay428_brochure_Sercel_CH.pdf SeaRay 428 Brochure (CH) DOWNLOAD
SeaRay428_brochure_Sercel_SP.pdf SeaRay 428 Brochure (SP) DOWNLOAD
SeaRay428_specifications_Sercel_EN.pdf SeaRay 428 Specifications (EN) DOWNLOAD
SeaRay428_Specifications_Sercel_RU.pdf SeaRay 428 Specifications (RU) DOWNLOAD
SeaRay428_Specifications_Sercel_CH.pdf SeaRay 428 Specifications (CH) DOWNLOAD